X – Ray Diffraction Laser THERMO LOGG Contact Angle Analyzer Langmuir – Blodgett Film Deposition Scanning Electron Microscope with EDS (X-ray spectrometry) Small Angle X-Ray Scattering Apparatus Wide Angle X-Ray Scattering Apparatus Mercury Porosimeter Mass Spectrometer Nitrogen Porosimeter ultra-microtome AA GC-MS Scanning Electron Microscope with EDS (X-ray spectrometry) Proteome analysis [Proteomics] Remote Measurement System Transmission Electron Microscope CNC ΑGIECharmilles ΑCTSPARK FW-1P [CNC AGIE] CNC DMG CTX 510 Eco PHOTRON FASTACAM SA3 INSTRON 8801 Testing Device ROMER OMEGA R-SCAN & 3D RESHAPER LASER Cutter Pantograph with extra PLASMA torch CNC ΙDA XL 1200 Optical and Contact Coordinate Measuring Machine TESA MICRO-HITE 3D  RSV-150 Remote Sensing Vibrometer Ground Penetration Radar [GPR] Audio Magneto Telluric Optical Time Domain Reflectometers [OTDR] Non ion Rad Electric e-mat analysis Thermogravimetric Analyzers - Differential Scanning Calorimetry Magnetron Deposition Metal Deposition Grid Computing Center

Electrical Energy Analyzer VIP SYSTEM 3/ MK3

The VIP SYSTEM 3/ MK3 monitor alI three phases of a three-phase system.They are portable, light-weight device with built-in 40-column printer.The VIP SYSTEM 3/ MK 3 can run on batteries and can measure no less than 81 electrical parameters with very high accuracy.In particular, the VIP SYSTEM 3/ MK 3 are capable of measuring parametersnot generally covered by an instrument of this type.       

Contact person:

Eleni Apostolidou
tel. (+30) 2510462225
This email address is being protected from spambots. You need JavaScript enabled to view it.


They measure harmonic distortions; indicate average values and record maximum readings for variousparameters; they measure and print out active and reactive power consumption; and record micro interruptions in the power supply (mains) and the duration of longer interruptions. The built-in printer is capable of printing measurement data on request andcan provide automatic print-out of the sequence of measurements relative to any four parameters selected by the operator. The instruments printer can also provide bar graphs plotting 2 of the parameters measured: they also provide rapid print-out of the value of those parameters which cross the alarm thresholds and monitor their development with frequent print-out until they come back inside the preset limits.



  • Display: LCD multiplexed with SUPER TW type liquid. Display structured in 256x64 pixel, divided  into 8 lines of 40 characters.
  • Method: Variable sampling and analog/digital conversion.Variable sampling is a function of the frequency reading on phase L 1.
  • Sampling frequency: 4 kHz
  • Number of samples far each phase: 400 (100 mS)
  • Automatic offset compensation: Every minute
  • Type of connection: 4 wire, 3 wire.


LlTHIUM BATTERY: 3V, 500 mA/h; data protection and estimated life, > 5 years.

Battery operating period:3 hours (without print-out or display illumination).

External dimensions: 240x220x115 mm

Weight:  2.25 kg